GX-Series Power Supplies offer a range of available power from 400 to 4500 watts for our ultrasonic welding presses and actuators in the 40 kHz, 20 kHz and 15 kHz frequencies. (Specific power availability is shown below.) Features include digital amplitude control, ultrasonic horn/stack frequency display and good part / bad part output signal.
| Main features of GX-series power supply Automatic frequency tuning Digital amplitude control Soft-start Overload Protection Circuitry Ultrasonic horn/stack frequency display Weld, Hold, Delay and Afterburst Timers Digital Force Triggering Load regulation circuitry Digital wattage display RS232 Serial Port Printer Output Optional PLC I/O (Input/Output) Ports Optional Linear Encoder for Distance Welding
|
|
|
|
GX-Series Model:
GXT – weld by digital time GXE – weld by digital time and/or constant energy GXL – weld by digital time, constant energy and/or distance GXC – for continuous duty welding or remote PLC actuation
|
|
|
Frequency | Available Power | 40 kHz
| 400、800Watts
| 30 kHz | 1200Watts | 20 kHz | 1200、1700、2200、3500Watts | 15 kHz | 3500、4500Watts |
|
|
|
Technique specifications: |
| Model | GX 400 | GX 800 | GX 1200 | GX 1700 | GX 2200 | GX 3300 | GX 3500 | GX 4500 | | Frequency | 40kHz | 20kHz | 15kHz | | Max. Power | 400W | 800W | 1200W | 1700W | 2200W | 3500W | 3500W | 4500W | | Control Mode | Time ( GXT ) , Energy ( GXE & GXL ), Distance ( GXL ) | | Auto Tuning | Standard | | Amplitude
Control | Digital Control (20 - 100%) | | Frequency
Display | Available for All Models | | Power
Display | Available for All Models | | Input Power | AC200 - 240V (50/60Hz) |
|
|
|
